| Step 1: Start up your computer and insert (or enable) your wireless network card. |
| |
| Step 2: If you are in range of a wireless access point, you will see a popup in your taskbar like this one below: |
|
| |
| Step 3: Click on the popup and you will see the following screen: |
|
| |
Step 4: Click on the  text and you will be taken to the following dialog box: |
 |
| |
| Step 5: Click on the "Wireless Networks" tab. |
|
| |
| Step 6: Click on the "Add..." button under the "Preferred networks" section. |
 |
| |
Step 7: - Set the "SSID" box to SVSU
- Set the "Network Authentication" box to WPA2 (or WPA if WPA2 is not available)
- Set the "Data Encryption" box to TKIP
|
|
| |
| Step 8: Click on the "Authentication" tab. |
|
| |
| Step 9: Set the "EAP-Type" box to PEAP, and uncheck the "Authenticate as computer" box as shown: |
 |
| |
| Step 10: Click on the "Properties" button. |
| |
| Step 11: Uncheck the "Validate server certificate" box. |
 |
| |
| Step 12: Click on the "Configure" button. |
| |
| Step 13: Uncheck the "Automatically use my Windows logon" box. |
 |
| |
| Step 14: Keep clicking the "OK" button until all screens are closed. |
| |
| Step 15: You should now see the following popup in your taskbar: |
|
| |
| Step 16: Click on the popup and you will see the following screen: |
 |
| |
| Step 17: Enter your SVSU User ID in the "User name" field. Enter your SVSU Password in the "Password" field. Leave the "Logon Domain" field blank. |
| Note: You may need to re-synchronize your password to use the wireless network - visit the change password page at: http://www.svsu.edu/changepassword/ |
| |
| Step 18: Step back and wait. The logon process may take up to 2 minutes to complete. Once it has completed, you will see the following: |
|
| |
Step 19: Go to Step 3 of the registration process.
|
| |